Details about Cooling Tower

Manufacturers of Cooling Towers, Counter flow Cooling Tower and Cross flow Cooling Towers, PVC Honeycomb fills, Sprinkler, Nozzles, Fan and Motor, and More.

The PERFECT fiberglass, induced draft, counter flow cooling tower is the ideal solution for larger space-sensitive applications. Its corrosion resistant fiberglass construction makes it an excellent alternative to stainless steel cooling towers. While the choice of high performance, low clog, or splash fill options ensures the product flexibility to meet your exact water quality issues at the maximum efficiency possible. The PERFECT Make cooling tower is factory fabricated and ships fully assembled or in modules for quick field assembly.


Mode of Operation

The PERFECT Make tower is a mechanical-draft countertop cooling tower. Hot water flows into the cooling tower through pipes to spray nozzles and is distributed uniformly above the cooling tower fill. The required cooling air is delivered by an induced-draft axial fan. The air absorbs the heat from the water by evaporation and convection.

Distribution System

The water distribution system is located above the fill and consists of PVC (polyvinyl chloride) or PP (polypropylene) piping. PP spray nozzles are designed to distribute the hot water uniformly in fine droplets over the fill.


The standard fill for clean water consists of glued PVC or welded PP film-fill packs. For dirty water applications with higher suspended solids content, PP or PE (polyethylene) trickle-grid type splash fill is available in different configurations.

Mechanical Equipment

The cooling tower coating fan consists of FRP (fiber reinforced polyester) or aluminum axial fan blades with a steel fan hub mounted directly on the motor shaft. The fan blade pitch is adjustable at standstill to accommodate process conditions. The direct driven motor, designed specifically for cooling tower coating operation (100% humid hot air), is a low noise design and suitable for continuous operation with variable frequency drives (VFD). Motor and fan are mounted on an HDG (hot dip galvanized) steel or optional stainless steel support frame structure above the fan.

Multiple Cells Configuration

The Perfect Make cooling tower can be installed as a multi cell in-line configuration. Each two adjacent cells have a one joint center wall. Back to back configurations are also available.

Details And Options

FRP water collection basin: Available with either bottom or side suction outlet, including an HDG basin support structure and outlet flange.

Manual reset ensures inspection to correct root cause. Several models are available.

Ultra quiet fan: Wide-chord acoustic geometry fan design maximizes efficiency while significantly reducing sound levels.